200W Switching mode power supply

PRODUCT > Power adapter > 200W Switching mode power supply

200W Switching mode power supply

■ Features
·INPUT:100-240VAC 50/60Hz
·Output: 5-48V, 0.3-10A
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。

Model：

MCNT1208000 MCNT1209000 MCNT12010000 MCNT2406000 MCNT2407000 MCNT2408000 MCNT3605000 MCNT4804000

Product details

SPECIFICATION
OUTPUT	MODEL NO.	MCNT1208000	MCNT1209000	MCNT12010000‍‍‍‍‍	MCNT2406000‍‍	MCNT2407000‍	MCNT2408000‍	MCNT3605000	MCNT4804000
	OUTPUT VOLTAGE	12V	12V	12V	24V	24V	24V	36V	48V
	OUTPUT CURRENT	0-8A	0-9A	0-10A	0-6A	0-7A	0-8A	0-5A	0-4A
	OUTPUT POWER	96W	108W	120W	144W	168W	192W	180W	192W
	PFC (MIN.)	0.9	0.9	0.9	0.9	0.9	0.9	0.9	0.9
	RIPPLE & NOISE (max.)	120mVp-p	120mVp-p	120mVp-p	240mVp-p	240mVp-p	240mVp-p	360mVp-p	480mVp-p
INPUT	INPUT VOLTAGE	100 ~ 240VAC
	FREQUENCY	50 / 60Hz
	INPUT POWER	NO LOAD: 0.21W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 250W MAX , AT RATED OUTPUT .
	TEMPERATURE RISING	CASE 65 ℃ MAX FOR RATED OUTPUT
	EFFICIENCY (MIN)	88%
	DIELECTRIC WITHSTAND TEST	5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND
PROTECTION	OVER LOAD	THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT
	SHORT CIRCUIT:	CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY
ENVIRONMENT	WORKING TEMP	THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO +45 ℃
	STORAGETEMPERATURE	THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO +75 ℃
	RESISTANCE TO HEAT	WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM

	RESISTANCE TO MOISTURE	THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.
SAFETY & EMC	SAFETY STANDARDS	UL62368 EN60335
	EMI	CISPR22 CLASS
	INSULATION	B
OTHERS	MTBF	THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃
CONNECTOR	PLUG	5.52.1, 5.52.5, RCA, XLR, XT60, M16, C14.
	CABLE	UL2464 18# 1M length