300W Switching mode power supply
300W Switching mode power supply
■ Features
·INPUT:100-240VAC 50/60Hz
·Output: 5-48V, 0.3-15A
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。
·INPUT:100-240VAC 50/60Hz
·Output: 5-48V, 0.3-15A
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。
MCNT12012000
MCNT12015000
MCNT2409000
MCNT24010000
MCNT24012000
MCNT3608000
MCNT4806000
| SPECIFICATION | ||||||||||
| OUTPUT | MODEL NO. | MCNT12012000 | MCNT12015000 | MCNT2409000 | MCNT2410000 | MCNT24012000 | MCNT3608000 | MCNT4806000 | ||
| OUTPUT VOLTAGE | 12V | 12V | 24V | 24V | 24V | 36V | 48V | |||
| OUTPUT CURRENT | 0-12A | 0-15A | 0-9A | 0-10A | 0-12A | 0-8A | 0-6A | |||
| OUTPUT POWER | 144W | 180W | 216W | 240W | 288W | 288W | 288W | |||
| PFC (MIN.) | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |||
| RIPPLE & NOISE (max.) | 120mVp-p | 120mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 360mVp-p | 480mVp-p | |||
| INPUT | INPUT VOLTAGE | 100 ~ 240VAC | ||||||||
| FREQUENCY | 50 / 60Hz | |||||||||
| INPUT POWER | NO LOAD: 0.21W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 400W MAX , AT RATED OUTPUT . | |||||||||
| TEMPERATURE RISING | CASE 65 ℃ MAX FOR RATED OUTPUT | |||||||||
| EFFICIENCY (MIN) | 88% | |||||||||
| DIELECTRIC WITHSTAND TEST | 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND | |||||||||
| PROTECTION | OVER LOAD | THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT | ||||||||
| SHORT CIRCUIT: | CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY | |||||||||
| ENVIRONMENT | WORKING TEMP | THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO +45 ℃ | ||||||||
| STORAGETEMPERATURE | THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO +75 ℃ | |||||||||
| RESISTANCE TO HEAT | WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM | |||||||||
| RESISTANCE TO MOISTURE | THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER. | |||||||||
| SAFETY & EMC | SAFETY STANDARDS | UL62368 EN60335 | ||||||||
| EMI | CISPR22 CLASS | |||||||||
| INSULATION | B | |||||||||
| OTHERS | MTBF | THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃ | ||||||||
| CONNECTOR | PLUG | 5.5*2.1, 5.5*2.5, RCA, XLR, XT60, M16, C14. | ||||||||
| CABLE | UL2464 18# 1M length | |||||||||
- Name
- Phone
- Corporate name
- Address
- Leaving Message*
Previous：
12V Lead-acid battery charger
Email: info@mcnt.cn 
Adress: No 13, Maoye Rd,Changxiang Vil,Hengli,Dongguan,