OUTPUT

MODEL NO.  

MCNT1267000

MCNT1686000

MCNT2105000

MCNT2524000

MCNT2944000

 MCNT3363000

MCNT4203000

MCNT5462000

MCNT5882000

OUTPUT VOLTAGE  

  7.5-12.6V

 10-16.8V

 12.5-21V

 15-25.2V

 17.5-29.4V

 20-33.6V

 25-42V

 32.5-54.6V

35-58.8V

OUTPUT CURRENT 

7A

6A

 5A

  4A

 4A 

 3A 

 3A

 2A

2A

OUTPUT POWER

88.2W

100.8W

 105W

100.8W

117.6W

100.8W

126W

109.2W

117.6W

PFC (MIN.)

  0.9

 0.9

 0.9

 0.9

 0.9

 0.9

 0.9

 0.9

0.9

RIPPLE & NOISE (max.)

  150mVp-p

 200mVp-p

 250mVp-p

 300mVp-p

 350mVp-p

 400mVp-p

 500mVp-p

 600mVp-p

700mVp-p

  INPUT

INPUT  VOLTAGE 

100 ~ 240VAC   

FREQUENCY 

50 / 60Hz

INPUT POWER

NO LOAD: 0.5W MAX   AT INPUT 100-240VAC  50/60Hz .   LOADING :   80W MAX , AT RATED OUTPUT .

TEMPERATURE RISING

CASE 65 ℃ MAX  FOR RATED OUTPUT

EFFICIENCY (MIN)

88%

DIELECTRIC WITHSTAND TEST

5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND 

 PROTECTION

OVER LOAD

THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT

SHORT CIRCUIT:

CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY

ENVIRONMENT

WORKING TEMP 

THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM  -29 ℃ TO +45 ℃

STORAGETEMPERATURE

THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM  -40 ℃ TO +75 ℃

RESISTANCE TO HEAT

WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM

RESISTANCE TO MOISTURE

THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT   40 ± 2 ℃    AT  90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.

SAFETY & EMC

SAFETY STANDARDS

UL62368   EN60335

EMI

CISPR22 CLASS

INSULATION

B

  OTHERS

MTBF

THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃

 CONNECTOR

PLUG

5521, 5525, RCA, XLR, XT60, M16, C14.

CABLE

UL2464 18# 1M length